Guide to Pressure Washer Maintenance

Power Washer Maintenance

With a pressure washer, you want to practice proper maintenance because this is going to lengthen the lifespan of your machine. It is vital that you take the time to examine your power washer and clean it after each use. Doing this before and after each use will help you to avoid problems with the performance of your washer. Another thing, this will save you money when it comes to finding repairs and parts for your pressure washer.

One of the things that we commonly see among some our pressure washers that we use on a regular basis is wear and tear to the hose and screen area.   Many of our workers will sometimes treat our power washers like other pieces of equipment that can be thrown around, not realizing that there are a few fragile parts.   With that said, we would like to cover a few recommendations for those looking to maintain their machine.

Oil And GasGenerac 6023 2,700 PSI 2.3 GPM 196cc OHV Gas Powered Residential Pressure Washer review

When it comes to oil and gas, you want to check the oil and gas levels regularly. The reason for this is because it can be hard on your power washer to let it get too low. You should put in oil and gas as it is needed. Also, you should change the oil when it is needed. The water pressure of your pressure washer should be between 15 to 25 PSI.

 

Checking The Screen

If the screen is dirty, you should wash it with water. Another thing is that if you notice that the screen has been damaged, you should replace the screen and rubber washer when it has been damaged. Proper pressure washer maintenance can help you to avoid expensive repairs in the long-term. The more you take care of your power washer, the better off you will be in the long-term.

AR Blue Clean AR383 1,900 PSI 1.5 GPM 14 Amp Electric Pressure Washer with Hose Reel reviewExamine The Hose

The hose is another important thing when it comes to the pressure washer. You want to replace the hose when you notice that it has started to leak, if there is a cut or there is a bulge in the hose. When you are choosing the new hose, you should make sure that your hose exceeds the maximum pressure rating for your washer. The hose of the power washer is vital for getting the best results.

Testing The Wand

When it comes to testing your wand, you should replace the O-ring if you are finding that the connectors are leaking. Also, you want to clean the nozzle if you suspect that it has been clogged. If you cannot manage to do this, then it would be best if you just replaced the spray wand for the best results.

These are all things that you should keep in mind when it comes to your pressure washer. Those who get the best results are those who take the time to do it properly. Power washer maintenance when done properly can help to lengthen the lifespan of your pressure washer. Another thing is that it will protect your investment and save you money over the long-term.